Bottled Drinking Water Quality Standard in Thailand
WEPA Water Environment Partnership in Asia
close

Bottled Drinking Water Quality Standard in Thailand

Properties Parameter Units Maximum Allowable Concentration
Physical 1. Colour Hazen 20
2. Odour - None
3. Turbidity Silica scale unit (SSU) 5
4. pH – 6.5 - 8.5
Chemical 5. Total Solids mg/L 500
6. Total Hardness as CaCO3 mg/L 100
7. Arsenic (As) mg/L 0.05
8. Barium (Ba) mg/L 1.0
9. Cadmium (Cd) mg/L 0.005
10. Chloride as Chlorine mg/L 250
11. Chromium (Cr) mg/L 0.05
12. Copper (cu) mg/L 1.0
13. Iron (Fe) mg/L 0.3
14. Lead (Pb) mg/L 0.05
15. Manganese (Mn) mg/L 0.05
16. Mercury (Hg) mg/L 0.002
17. Nitrate as Nitrogen (NO3 - N) mg/L 4.0
18. Phenol mg/L 0.001
19. Selenium (Se) mg/L 0.01
20. Silver (Ag) mg/L 0.05
21. Sulphate (SO4) mg/L 250
22. Zinc (Zn) mg/L 5.0
23. Fluoride as Fluorine (F) mg/L 1.5
24. Aluminium (Al) mg/L 0.2
25. Alkylbenzene Sulfonate mg/L 0.2
26. Cyanida (CN) mg/L 0.1
Bacterial 27. Coliform MPN/100cm³ 2.2
28. E.coli MPN/100cm³ None
29. Disease causing bacteria MPN/100cm³ None
Penalty: A licensee who does not comply with this notiifcation shall be subjected to imprisonment for a term not exceeding 2 years, or punished by fine not exceeding 20,000 baht or both.

Source : Notification of the Ministry of Public Health, No. 61 B.E. 2524 (1981), issued under the Food Act B.E. 2522 (1979), published in the Royal Gazette, Vol. 98, Part 157 (Special Issue), dated September 24, B.E. 2524 (1981).

pagetop   close